1. automatic product,High thermal efficiency,Low moisture content.
2. Little noise,Clamping force,High strength.
3. High production efficiency ,High efficiency heat conduction.
4. High tensile strength,Long service life,high Penetrating power.
5. Good adhesion,Use less gas,Rapid prototyping
Application:
- The machine vertical layout.Movet in all hydraulic transmission. Machine aports a smooth, quilc k mould clamping.Clamping force. Small Mold discouraged under this to work.Save time.
- Using a variety of foaming stripping ways to make the aircraft moreeconomical steam (province than the average machine half),greatly improving the product quality.
- Easy to operate,the operater simplyremove the product,you can learn a little inducyion without training.
- This machine adopts the most advanced Taiwanese computer touch screen and high-Korea proggrammable controllers,degree of automation,easy to operate.
Technical Data:
| Item | Unit | FAV1750E |
| Mould Dimension | mm | 1800*1600 |
| Max Product Dimension | mm | 1250*1050*350 |
| Stroke | mm | 150-1200 |
| Steam | Entry | mm | 65 |
| Consumption | Kg/Cycle | 6 . 5 |
| Compressed Air | Entry | mm | 50 |
| Consumption | m³/Cycle | 2 . 5 |
| Cooling Water | Entry | mm | 50 |
| Consumption | Kg/Cycle | 50-180 |
| Vacuum Pump Capacity | m³/h | 290 |
| Drainage | mm | 125 |
| Cycle time | s | 100 200 |
| Connected Load/Power | kw | 11 |
| Weight | Kg | 4500 |
Terms:
Terms of Payment: 30% advance payment by T/T upon signing of sales contract
70% covered by confirmed irrevocable L/C by sight or T/T before shipping.
Delivery: 60 days after receipt of advance payment.
Installation and Start-up:
TWO technicians will be assigned to coordinate installation,
commissioning and training; cost for flight ticket,
suitable accommodation and additional USD 100/day
each work fee will be covered by Buyer,
Warranty: 12 months limited warranty
starting from date of arrival excluding wear parts.
Shipping cost for parts to be replaced during warranty period have to be borne by the customer.
